Filter
Top Products
32
Customizing Your Machine
Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the
Parameter Table, are preset for you and do not need to be changed. If you do want to make a change, read
the table carefully. Some parameters, such as the Resolution and Contrast parameters, can be temporarily
changed by simple key operation just before a transmission is made. When the transmission ends,
however, these parameters return to their preset values (Home position). Other parameters can only be
changed by the procedure described below.
NOTE
1 To scroll the Fax Parameters in Step 2, press or .
2 To print out a Fax Parameter List, see page 94.
General Description
Setting the Fax Parameters
1
SET MODE (1-8)
2
NO.=❚ (01-99)
3
Enter Fax Parameter number from the Parameter Table.
Ex: for CONTRAST
NO.=01 (01-99)
4
NORMAL<>
5
Enter the new setting value or press .
Ex: for LIGHTER
LIGHTER<>
6
To set another parameter, press to return to
Step 3 or press to return to standby.
RESOLUTION?
7
4
0
1
2
CLEAR
STOP