Filter
Top Products
Customizing Your Machine
35
Fax Parameter Table
Programming
Your Machine
34 ENERGY SAVER
MODE
1 Off To reduce the power consumption in standby, select either
Energy-Saver or Sleep mode and specify the Delay Time
(1 to 120 minutes) for the machine to enter into the
selected mode.
The Delay Timer setting is only available in the Energy-
Saver or Sleep Modes.
Off : The unit will remain in standby
mode and consume more energy
than when in Energy-Saver or
Sleep modes.
Energy-Saver Mode : Saves energy by consuming less
power than when in standby mode
by turning off the fuser unit after the
specified time.
Sleep Mode : This is the lowest power state that
the machine enters after the
specified time without actually
turning off.
2Energy-
Saver
3Sleep
35 DAYLIGHT TIME 1 Invalid Selecting whether the clock adjusts for Daylight Saving
Time automatically. The built-in clock will advance 1 hour
at 1:00 am on the last Sunday in March and fallback 1 hour
at 1:00 am on the last Sunday in October.
2 Valid
38 ACCESS CODE (----) Enter a 4-digit Access Code to secure the machine from
unauthorized use. (See page 75)
39 PIN CODE ACCESS 1 None Selecting the access method (Prefix or Suffix) to dial a
number with PIN Code. (See page 78)
2Suffix
3Prefix
47 REMOTE RECEPTION 1 Invalid Selecting whether or not the machine accepts the remote
reception command. (See page 58)
2 Valid
48 TELEPHONE LINE 1 PSTN Selecting the type of line connected.
2 PBX
49 PSTN ACCESS CODE (----) Setting PSTN Access Code. (max. 4 digits)
51 REMOTE
DIAGNOSTIC
1 Invalid Selecting whether or not the machine accepts to update
the firmware or Remote Diagnostics from the remote
station. Please ask your Panasonic Authorized Dealer for
details.
2 Valid
52 DIAGNOSTIC
PASSWORD
(----) Setting the password for Remote Diagnostic Mode. Please
ask your Panasonic Authorized Dealer for details.
53 SUB-ADDRESS
PASSWORD
(----) Setting a 20-digit password for secured sub-address
communication.
54 FAX FORWARD 1 Invalid Selecting whether the machine performs Fax Forwarding
to the specified destination. (See page 80)
2 Valid
57 COUNTRY CODE Selecting the country code when installing your machine.
58 LANGUAGE Selecting the language to be shown on the display and
reports.
No. Parameter
Setting
Number
Setting Comments
Continued on the next page...