Filter
Top Products
TALKSWITCH VOIP NETWORK TROUBLESHOOTING GUIDE
WWW.TALKSWITCH.COM 5
2.4 LINE HUNT GROUPS
The Set Line Hunt Group options are found in System Information -> Line Hunt Groups.
Choose a hunt group and TalkSwitch VoIP Numbers as the Line Type. By default, hunt group
88 is set to use the TalkSwitch VoIP lines.
2.5 SIP AND RTP PORT ASSIGNMENTS
The VoIP Ports options are found in Options -> Troubleshooting -> Advanced.
TalkSwitch uses 5060 for SIP signalling and 6000+ for RTP packets. These values are set in
the firewall routing table.
2.6 FIREWALL PORT MAPPINGS
Verify the firewall settings for services listing both SIP and RTP ports.
5060 should be forwarded to the IP address of Box 1 (UDP).