Filter
Top Products
Instruction Manual MSP-DUK9000
9
SECURITY INSTALLATION (OPTIONAL)
1. Using security wrench (provided), remove 5/16” standard set-
screw and replace using 5/16” security screw (see Figure 8).
2. Remove two screws from bottom of Projector Interface Plate,
preferably one from each corner.
3. Using security wrench and security screws from All-Points
Security package, secure Projector Interface Plate to projector.
4. Using security wrench (provided), replace screws in Projector
Interface Plate with undercut security screws from top from top
plate.
5. Remove two 1/4-20 x .5” round head carriage bolts and 1/4-20
acorn nut caps and replace using two security screws and lock
nut Nylocks (see Figure 8).
Figure 8. Adding Optional Security