Filter
Top Products
46
This symbol on the nameplate means the product is Listed by Underwriters Laboratories
Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of
fire, casualty and electrical hazards.
Appendix
The CE Mark is a Directive conformity mark of the European Community (EC).
The Remote Control
does not work.
–
Check the batteries.
–
Make sure no obstruction is between the projector and remote control.
–
Make sure you are not too far from the projector when using the remote control.
Maximum operating range is 16.4’ (5m).
–
Make sure the code of the remote control is conformed to the projector. (See page 14,
40.)
– Unlock Key lock for the remote control in the Setting Menu. (See page 40.)
Problem:
– Try these solutions.
Wireless Mouse function
does not work.
–
Make sure your computer is connected to the projector with a USB cable.
–
Check cable connection between the projector and your computer.
–
Check the mouse setting on your computer.
Computer 2 cannot be
selected.
The Terminal item
cannot be selected.
–
The Terminal item in the Setting Menu cannot be selected after Computer 2 is selected.
Select other input source such as Computer 1 or Video with the INPUT button on the top
control, the COMPUTER button or the VIDEO button on the remote control so that the
Terminal item can be selected.
–
Select Computer 2 at the Terminal item in the Setting Menu. (See “Terminal” on page
39.)
SERVICE
WARNING: High voltages are used to operate this projector. Do not attempt to open cabinet.
You can often correct operating problems yourself. If the projector fails to work properly, see "Troubleshooting" on pages 45
and 46.
If after following all operating instructions, you find that service is necessary, contact the Christie Service Station or store
where you purchased the unit.
Give the model number and explain the difficulty. We will advise you how to obtain service.