Filter
Top Products
Using Your MP3200
Error Indications
LED1 LED2 LED3 LED4 Status
Orange Green
Start blinking after steady on for 10 seconds
Paper jam (*1) , or
Label length measurement error (*2)
Orange Green
Start blinking after steady on for 10 seconds
Media compartment cover opened (*3)
Orange Green Green Green
Start blinking after steady on for 10 seconds
Thermal head or motor overheated (*4)
Red Green Green
Start blinking after steady on for 10 seconds
Thermal head broken (*5)
Red Green Green Green
Start blinking after steady on for 10 seconds
Thermal head or motor overcooled (*6)
Red Green Green
Start blinking after steady on for 0.5 second
Command error (*7)
(*) Please refer to the following resolutions.
(1) Paper jam :
Open the media compartment cover and reload the
media roll.
(2) Label length measurement error :
Check whether the sensor type and media type are
correct.
Re-conduct paper length measurement.
(3) Media compartment cover opened :
Close the media compartment cover.
(4) Thermal head or motor overheated :
The printer will automatically resume operation after the
thermal head or motor cools down to the normal
temperature.
(5) Thermal head broken :
Call a qualified service technician to replace the thermal
head.
(6) Thermal head or motor overcooled :
The printer will automatically resume operation after the
thermal head or motor comes to the normal temperature.
(7) Command error :
Reset MP3200(BT).
Resend a correct command.
20
MP3200 User’s Guide