Filter
Top Products
Maintenance and Troubleshooting
Cleaning Instructions
The MP3200(BT) should be cleaned after printing a few rolls of
media or if there are voids in the printout. Thus, cleaning
MP3200(BT) is a necessary maintenance activity to ensure
optimum performance and life. Clean the Printer areas by using
cleaning pen or cotton swabs moistened with isopropyl alcohol.
Please refer to following procedure and figure to clean the
Printer :
(1) Power off MP3200(BT).
(2) Open the media compartment cover.
(3) Remove the media roll.
Areas Methods
Print Head Use the cleaning pen or a cotton swab moistened with
isopropyl alcohol to clean the surface of the print head
from end to end.
Tear Bar
Use the cleaning pen or a cotton swab moistened with
isopropyl alcohol to clean the tear bar.
Platen Roller Rotate the platen roller and clean the surface of the
platen roller with cleaning pen or a cotton swab
thoroughly.
Interior
Blow the paper dust by using a can of compressed air
or by vacuuming. Ensure the paper sensor windows are
free of dust.
Exterior Use soft cloth moistened with water to clean the
exterior of the printer.
Paper Sensor
Platen Roller
Tear Bar
Print Head
a. Don’t use sharp objects to clean the print head. This may
result in damage to the Printer.
b. Let the print head cool to room temperature prior to
cleaning, protecting yourself from burns.
c. The tear bar has sharp edges. Please be careful when
cleaning the tear bar to avoid possible injury.
24
MP3200 User’s Guide