Filter
Top Products
5-10
Cisco 12000/10700 v3.1 Router Manager User Guide
OL-3865-01
Chapter 5 Managing Modules
Module Performance
Note Performance logging can also be started on a per module (GRP) or physical interface basis. For details
on how to start performance logging for a selected module (GRP), refer to the “Module Performance”
section on page 5-9. For details on how to start performance logging for a selected physical interface
(such as Ethernet, ATM, or DS-3), refer to the “Starting Performance Logging for a Selected Interface”
section on page 10-6.
Selecting a module provides performance data for the selected module. The values displayed relate to
CPU performance, so modules without a CPU display the same value as the CPU card in the chassis.
The Module Performance section provides the following information:
• Viewing the Module Performance Window
• Starting or Stopping Performance Logging
• Module Performance Window—Detailed Description
Viewing the Module Performance Window
Note The Module performance window can be launched from the chassis level. Please note that this window
cannot be launched from the module level.
To view the Module Performance window, proceed as follows:
Step 1 Right click on the chassis object and select the Performance>Module>Performance option. Refer to
Table 5-2 on page 5-2 for information on which objects allow you to launch the Module Performance
window. The Module Performance window appears, with the Performance tab displayed: