Filter
Top Products
TN3270 Server Commands 55
unbind-action
unbind-action
Use the unbind-action TN3270 configuration command to select what action to take when the
TN3270 server receives an UNBIND. Use the no form of this command to restore the default.
unbind-action {keep | disconnect}
no unbind-action
Syntax Description
Defaults
In TN3270 configuration mode, the default is disconnect.
In PU configuration mode the default is the value currently configured in TN3270 configuration
mode.
Command Modes
TN3270 configuration
PU configuration
Usage Guidelines
The unbind-action command can be entered in either TN3270 configuration mode or PU
configuration mode. A value entered in TN3270 mode applies to all PUs for that TN3270 server,
except as overridden by values entered in PU configuration mode. The unbind-action command
affects currently active and future TN3270 sessions
The no unbind-action command entered in PU configuration mode removes the override.
The unbind-action command affects currently active and future TN3270 sessions.
Example
The following command prevents automatic disconnect:
unbind-action keep
keep No automatic disconnect will be made by the server upon
receipt of an UNBIND.
disconnect LUT2 session clients will be disconnected upon receipt of
an UNBIND. LUT1 and LUT3 session clients are not
automatically disconnected.