36
Release Notes for the Cisco WAN Manager, Release 15.3.00 P1
OL-11190-01, Rev. C0
Installing and Uninstalling CWM 15.3.00 P1
the HELLO_EVENT_INTERVAL value times the EVENT_REDELIVERY_COUNT value. The
range for HELLO_EVENT_INTERVAL is 0 through 600, and the default is 60. The range for
EVENT_REDELIVERY_COUNT is 0 through 10, and the default is 3. The default for the
NMSERVER_DISCONNECT_TIMEOUT parameter is 60 times 3, or 180.
If you change any of these parameters, they must be adjusted so the HELLO_EVENT_INTERVAL
value times the EVENT_REDELIVERY_COUNT value continues to equal the
NMSERVER_DISCONNECT_TIMEOUT parameter value.
The Network Monitor Server configuration file (NMServer.conf) also contains the
PERIODIC_RESYNC_INTERVAL parameter. This parameter defines the interval in hours between
periodic resyncs. The range is 2 through 24, and the default is 8. You can also disable the periodic
resync feature by setting the PERIODIC_RESYNC_INTERVAL parameter to 0.
Installing Patch 1
This section describes how to install the CWM 15.3.00, Patch 1 (CWM 15.3.00 P1). Refer to
these sections:
• Backing Up the Existing Database, page 37
• Installing the CWM Server Patch, page 37
• Verifying and Restoring Your Saved Database, page 39
• Installing the CWM SNMPAgent (ServiceAgent) Patch, page 40
• Installing the SSC Patch, page 41
• Installing the SSM Patch, page 41
• Installing the RTM Proxy Patch, page 42
Table 22 lists the contents of the Patch 1.
Table 22 CWM 15.3.00 Patch 1 Contents
Component File
CWM 15.3.00-P1_CWM.tar.gz
SNMP Agent 15.3.00-P1_SNMPAgent.tar.gz
SSC 15.3.00-P1_SSC.tar.gz
SSM 15.3.00-P1_SSM.tar.gz
WANDEST Server 2.7.00, Patch 1 wandest2.7.00-P1_wdserver.tar.gz
WANDEST Client 2.7.00, Patch 1 wandest2.7.00-P1_wdclient.tar.gz
RTMProxy
Note Installthis onthe CWM Server only
if you are using SSM, but not using
the SNMPAgent. See Installing the
RTM Proxy Patch, page 42.
15.3.00-P1_RTMProxy.tar.gz