Filter
Top Products
3
Cisco Security Device Manager (SDM) Quick Start Guide
78-16254-01
Use SDM to Configure the Router
Task 3: Start SDM, and Complete the Startup Wizard
To start SDM and begin the router configuration, follow these steps:
Step 1 Open a web browser on the PC, and enter the following URL:
https://10.10.10.1
Note The https://... specifies that the Secure Socket Layer (SSL) protocol be used for a secure connection.
You can use http://... if SSL is not available.
Step 2 Enter the username cisco, and password cisco in the login window. If other login windows appear during
the startup process, enter the same credentials (cisco/cisco).
Step 3 The router’s home page appears (Figure 2). Click Security Device Manager in the left frame.
1711, 1712 Crossover, or straight through
with Ethernet switch
WIC 4ESW port 1x Port 1X
1710, 1721, 1751,
1760
Crossover, or straight through
with Ethernet switch
Ethernet 10/100
(Yellow port on router)
ETH ACT or
10/100 ACT
2600 Crossover, orstraight through
with Ethernet switch
Ethernet 0/0 or
FastEthernet 0/0
View LED at
port.
3600 Crossover, or straight through
with Ethernet switch
FastEthernet 0/0 or
FastEthernet 0
View LED at
port.
3700 Crossover, or straight through
with Ethernet switch
FastEthernet 0/0 or
FastEthernet 0
View LED at
port.
Table 1 Router Port Numbers
Cisco Router Model Cable Type Port Number LED