Filter
Top Products
Cisco Hoot and Holler over IP
Supported Platforms
12
Cisco IOS Release 12.1(5)T
Supported Platforms
Router Platforms:
• Cisco 2600
• Cisco 3600 series
Network Modules:
• NM-HDV
• NM-1V
• NM-2V
Supported Standards, MIBs, and RFCs
Standards
No new or modified standards are supported by this feature.
MIBs
No new or modified MIBs are supported by this feature.
To obtain lists of MIBs supported by platform and Cisco IOS release and to download MIB modules,
go to the Cisco MIB web site on Cisco Connection Online (CCO) at
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml.
RFCs
No new or modified RFCs are supported by this feature.
Configuration Tasks
See the following sections for configuring Cisco Hoot and Holler over IP:
• Configuring Multicast Routing (Required)
• Configuring the Virtual Interface (Required)
• Configuring VoIP Dial Peers (Required)
• Configuring E&M Voice Ports (Required, if used)
• Configuring for Receive Only Mode (Optional)
• Configuring Relevant Interface (Serial/Ethernet) (Required)
• Configuring Voice Ports in High-Density Voice Network Modules (Required, if using T1/E1)