Filter
Top Products
4-3
Cisco Wide Area Virtualization Engine 274 and 474 Hardware Installation Guide
OL-17739-01
Chapter 4 WAVE Inline Network Adapter
Ports and LED Indicators
Ports and LED Indicators
Figure 4-1 shows the 2-port inline network adapter port numbers, interface
designations, and LEDs.
Figure 4-1 2-Port Inline Network Adapter Port Numbering and LEDs
The inline network adapter has three LEDs that correspond to each port (the W0
LEDs correspond to Port
W0, and the W1 LEDs correspond to Port W1).
Table 4-1 describes the LEDs.
W0 Port WAN0; Group 0 WAN interface L0 Port LAN0: Group 0 LAN interface
W0 L0
LINK/ACT
100
1000
BYPASS
W0 L0
234291
Ta b l e 4-1 Inline Network Adapter LEDs
LEDs State Description
Link / Activity On The 10/100/1000BASE-T interface is receiving power.
Blinking The Ethernet link is transmitting data.
100 On The speed of the Ethernet connection is 100BASE-TX.
1000 On The speed of the Ethernet connection is 1000BASE-TX.
Bypass Both the 100 and
1000 LEDs are
on
The corresponding ports are in mechanical bypass mode.