Filter
Top Products
15
Figure 7 Virtual Interface Configuration Screen
Step 24 Enter the virtual interface IP address. Default is 1.1.1.1 (a non-valid IP address).
Step 25 Enter the DNS host name.
Step 26 Click Next and the WLAN Configuration screen appears (see Figure 8).
Figure 8 WLAN Configuration Screen
Step 27 Enter the profile name for your wireless network.
Step 28 Enter the service service identifier (SSID) for your wireless network.
Step 29 Click Next and a pop-up message appears indicating the default security settings that are
applied to the wireless LAN. You can change the default security options after the setup
wizard is complete.
Step 30 Click OK and the Radius Server Configuration screen appears (see Figure 9).