Filter
Top Products
8
Table 1 Startup Wizard Information
Wizard Setting Action
System Name The name you want to assign to the controller.
You can enter up to 32 ASCII characters.
Administrative user name and password The administrative username and password to be
assigned to this controller. You can enter up to 24
ASCII characters for each.
The default administrative username and
password are both admin and admin.
Management Interface VLAN Identifier The VLAN identifier of the management
interface (a valid VLAN identifier or 0 for an
untagged VLAN).
The VLAN identifier should be set to match the
switch interface configuration.
Management Interface IP Address The management interface is the default interface
for in-band management of the controller and
connectivity to services such as AAA servers.
You can access the controller’s GUI interface
using this address.
Management Interface Netmask Enter the IP address of the management interface
netmask.
Management Interface Default Router Enter the IP address of the default router.
Management Interface Port Number Enter the port number of the access point
manager interface. The default is 1.
Primary DHCP Server IP Address The management interface DHCP server IP
address. The default is 192.168.1.1.
Secondary DHCP server IP Address The IP address of the a secondary DHCP server.
The default is 0.0.0.0.
LWAPP Transport Mode The default is Layer 3.
RF Mobility Domain Name The name of the mobility group/RF group to
which you want the controller to belong.
The default is default.