Filter
Top Products
17
Figure 11 Configuration Wizard Completed Screen
Step 36 Click the Save And Reboot button to save your configuration.
Note Click the Back button to return to previous screens if you need to change any part of
your configuration.
Your WLC526 is ready to connect to an SBCS compatible switch.
4 Connecting to an SBCS Compatible Switch
Follow the instructions given in the Cisco Smart Business Communications System Setup document to
connect your controller to an SBCS compatible switch, such as the switch. Refer to the “Related
Documentation” section on page 4 for instructions on how to obtain this document.
Note A maximum of two controllers can be configured to the switch.
5 Connecting Access Points
Follow the instructions given in the Cisco Smart Business Communications System Setup document to
attach up to six access points to the controller. Refer to the “Related Documentation” section on
page 4 for instructions on how to obtain this document.