Cisco Systems 600 Network Router User Manual


 
1-6
Cisco Aironet 600 Series OfficeExtend Access Point User Guide
Chapter 1 Cisco Aironet 600 Series OfficeExtend Access Point User Guide
Accessing the Cisco Aironet 600 Series OfficeExtend Access Point GUI
Note Ethernet port 4 (Remote LAN port) may not be used to configure the 600 Series OfficeExtend
access point.
Step 2 With the 600 Series OfficeExtend access point connected to your home router/gateway as described in
the procedure “Installation Guidelines” section on page 1-4, enter the IP address of t
he 600 Series
OfficeExtend access point in the Address field of your Internet browser (http://<ap
-ipaddress>) and
click Go.
Note The default IP address is 10.0.0.1.
Note Make sure your laptop is not connected to your company’s network using a virtual private
network (VPN) connection.
The 600 Series Office Extend Access Point Login page appears.
Step 3 When prompted, enter the username and password to log into the access point.
Note The default username and password are admin and admin.