Filter
Top Products
1-16
Cisco Aironet 600 Series OfficeExtend Access Point User Guide
Chapter 1 Cisco Aironet 600 Series OfficeExtend Access Point User Guide
Cisco Aironet 600 Series OfficeExtend Access Point Local Customer Interface
Cisco Aironet 600 Series OfficeExtend Access Point Local
Customer Interface
The Cisco Aironet 600 Series OfficeExtend access point console supports the following configuration
items:
• Local SSID
–
SSID Name
–
MAC Filtering
–
Security type: WPA-PSK TKIP/AES, WPA-PSK AES, WPA2-PSK TKIP/AES, WPA2-PSK
AES, and WEP (not recommended)
–
SSID Broadcast/Hidden
• Bands supported (2.4Ghz (B/G/N 20), 5Ghz (A/N 20/40), All)
• Selection of either manual or automatic channel selection per band
• Configuration of optional local DHCP Server
–
Local IP address
–
Subnet address and mask
–
Range of addresses that may be allocated
• Ability to configure the initial primary Wireless LAN Controller for CAPWAP
• Use of DHCP or static address for the uplink port (local IP address, netmask, and default router)
• View logged errors or clear the log
In addition, the web should allow for a password
to be added and operate only over https.
The following sections provide the screens associated with t
he configuration.
AP GUI
AP GUI has four major sections:
• HOME - This page shows general information about the AP settings and a summary of the statistics.
• CONFIGURATION - This page is a multi-tab page which allows the user to configure different
options like personal SSID, local DHCP server, etc.
• EVENT LOG - This page provides the user the ability to view the logged errors and ability to clear
the log.
• HELP - This displays help for the pages listed above, especially the configuration page.
The rest of this section shows the appe
arance of each page/tab.