Filter
Top Products
Index
IN-2
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
OL-13417-01
commands
activity 5-4
configdiskcap 6-3
down 4-2
hwconfig 6-2
net 7-1
ping 5-7, 7-1
restart 7-2
restart disable 4-2
restart enable 4-3
spanstat 5-3
update 4-2
update status 4-3
update trace 4-3
COM port, laptop parameters 3-2
conferencing
testing in nonrecorded meetings with ad hoc
recording
5-6
testing in recorded meetings 5-6
configdiskcap command 6-3
configuring
HyperTerminal 3-3
laptop 3-2
connecting
E1 or T1 PRI telephony cables
with one MP-MA-16-PRI 2-19
with one MP-MA-16-PRI and one
MP-MA-4-PRI
2-25
with one MP-MA-4-PRI 2-23
with two MP-MA-16-PRIs 2-26
with two MP-MA-4-PRIs 2-24
IP telephony cables 2-28
LAN cable to Cisco Unified MeetingPlace 8100
series
2-11
laptop to Cisco Unified MeetingPlace 3-1
modem 2-36
power cable to Cisco Unified MeetingPlace 8100
series
2-11
SCSI cable to Cisco Unified MeetingPlace 8112 2-11
T1 CAS telephony cables for Cisco Unified
MeetingPlace 8112
2-13
telephony cables for E1/IP or T1 PRI/IP system 2-32
telephony cables for T1 CAS/IP system 2-35
contents of shipped boxes 2-1
crossover cable for RJ-48 connectors, requirement 1-4
custom cables, requirements for E1 and T1 PRI 1-10
D
DB9 serial cable, requirement 1-4
dial-up networking, setting up 3-4
disk capacity, monitoring 6-3
down command 4-2
E
E1
about telephony configurations for 2-15
connecting telephony cables
with one MP-MA-16-PRI 2-19
with one MP-MA-16-PRI and one
MP-MA-4-PRI
2-25
with one MP-MA-4-PRI 2-23
with two MP-MA-16-PRIs 2-26
with two MP-MA-4-PRIs 2-24
mixed with IP configuration, about 2-30
mounting breakout box 2-7
testing
inbound calls by using circular hunting 5-3
inbound calls by using dialing sequence 5-4
outbound calls 5-4
with IP, connecting cables 2-32
E1 digital trunks
connection requirements 1-10
requirements 1-10
supported protocols 1-10
enabling server disk capacity monitoring 6-3
environmental requirements