Filter
Top Products
CHAPTER
3-1
Clear Channel 6-Port T3 (DS3) Line Card Installation and Configuration
OL-3449-02
3
Removing and Installing Line Cards
This chapter describes how to remove the 6T3 line card from supported platforms and also how to install
a new or replacement line card. This chapter contains the following sections:
• Installation Overview, page 3-1
• Handling Line Cards, page 3-2
• Online Insertion and Removal, page 3-2
• Warnings and Cautions, page 3-3
• Line Card Removal and Installation, page 3-3
• Connecting a T3 SMB Cable, page 3-5
Installation Overview
Each line card circuit board is mounted to a metal carrier and is sensitive to electrostatic discharge (ESD)
damage.
Note When a line card slot is not in use, a blank line card must fill the empty slot to allow the router to conform
to electromagnetic interference (EMI) emissions requirements and to allow proper airflow across the line
cards. If you plan to install a new line card in a slot that is not in use, you must first remove the blank
line card.