Filter
Top Products
5-10
Cisco MWR 1900 Mobile Wireless Edge Router Software Configuration Guide
78-13983-04
Chapter 5 Command Reference
ppp mux frame
ppp mux frame
To set the maximum length (in bytes) of the PPP superframes, use the ppp mux frame command in
interface configuration mode. To set the maximum length to the default, use the no form of this
command.
ppp mux frame integer
no ppp mux frame
Syntax Description
Defaults The default maximum length is 197.
Command Modes Interface configuration
Command History
Usage Guidelines To use this command, you must first enable PPP multiplexing/demultiplexing.
Examples The following example sets the maximum superframe length to 80 bytes.
ppp mux frame 80
Related Commands
integer The maximum number of bytes in any multiplexed PPP superframe. Possible
values are 1 through 512 bytes.
Release Modification
12.2(8)MC2 This command was introduced.
Command Description
ppp mux Enables PPP multiplexing/demultiplexing
ppp mux delay Sets the maximum delay.
ppp mux pid Sets the default PPP protocol ID.
ppp mux subframe count Sets the maximum number of subframes in a superframe.
ppp mux subframe length Sets the maximum length of the PPP subframe.
show ppp mux Displays PPP mux counters for the specified multilink interface.