Chapter 4 Troubleshooting
Problems during First Startup
4-2
Cisco 811 and Cisco 813 Routers Hardware Installation Guide
78-10188-03
Problems during First Startup
Table 4-1 lists problems that could occur after you turn on the power switch for
the first time.
Table 4-1 Problems during First Startup
Symptom Problem Solutions
All LEDs,
including OK
LED, are off.
No power to
router
Perform the following steps in the following order:
• Make sure that the power switch is ON.
• Make sure that all connections to and from the power
supply are securely connected.
• Make sure that the power outlet has power.
• If the problem continues after these checks, the router
might have a faulty power supply. Contact your Cisco
reseller.