Filter
Top Products
FINAL DRAFT —Cisco Confidential
5-7
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
OL-17502-01
Chapter 5 CLI Tips, Techniques, and Shortcuts
Viewing System Information with show Commands
adjacency Adjacency information
aliases Display alias commands
alphadisplay Shows the message being displayed on the alpha display
aps SONET APS information
arm IP ARM information
arp ARP table
as-path-access-list List AS path access lists
asic-errors ASIC error information
atc Attractor Cache related
auto-rp Auto-RP Commands
buffer-manager Show all buffer manager memory related information
bundle Show hardware related information for Bundles.
calendar Display the system calendar
cdp CDP information
cef Cisco Express Forwarding
cetftp HFR control plane ethernet TFTP server
checkpoint Show checkpoint services
cinetd cinetd daemon
clns Display CLNS related information
clock Display the system clock
commit Show commit information
--More--
Tip If you do not see the --More-- prompt, try entering a value for the screen length with the terminal
length command in EXEC mode. Command output is not paused if the length value is set to zero. The
following example shows how to set the terminal length:
RP/0/RSP1/CPU0:router# terminal length 20
For information on searching or filtering CLI output, see the “Filtering show Command Output” section
on page 5-9.
Halting the Display of Screen Output
To interrupt screen output and terminate a display, press Ctrl-C, as shown in the following example:
RP/0/RSP0/CPU0:router# show running-config
<Ctrl-C>
Redirecting Output to a File
By default, CLI command output appears on screen. CLI command output can be redirected to a
user-specified file by entering a filename and location after the show command syntax. The following
command syntax is used to redirect output to a file:
show command | file filename
This feature enables you to save any show command output in a file for further analysis and reference.
When you choose to redirect command output, consider the following guidelines:
• If the full path of the file is not specified, the default directory for your account is used. You should
always save your target configuration files to this location.