Filter
Top Products
FINAL DRAFT —Cisco Confidential
2-7
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
OL-17502-01
Chapter 2 Bringing Up Cisco IOS XR Software on the Router
Verifying the System After Initial Boot
RP/0/RSP0/CPU0:router# show redundancy
Redundancy information for node 0/RSP0/CPU0:
==========================================
Node 0/RSP0/CPU0 is in ACTIVE role
Partner node (0/RSP1/CPU0) is in STANDBY role
Standby node in 0/RSP1/CPU0 is ready
Reload and boot info
----------------------
RP reloaded Wed Feb 15 13:58:32 2008: 1 week, 6 days, 22 hours, 49 minutes ago
Active node booted Wed Feb 15 13:58:32 2008: 1 week, 6 days, 22 hours, 49 minutes ago
Standby node boot Wed Feb 15 13:59:00 2008: 1 week, 6 days, 22 hours, 49 minutes ago
Standby node last went not ready Wed Mar 1 07:40:00 2008: 5 hours, 8 minutes ago
Standby node last went ready Wed Mar 1 07:40:00 2008: 5 hours, 8 minutes ago
There have been 0 switch-overs since reload
show environment Command: Example
To view environmental monitor parameters for the system, use the show environment command in
EXEC or administration EXEC mode.
Use the following command syntax:
show environment [options]
Type the show environment ? command to view the command options.
The following example shows a router’s temperature information:
RP/0/RSP0/CPU0:router# show environment temperatures
R/S/I Modules Inlet Hotspot
Temperature Temperature
(deg C) (deg C)
0/1/*
host 28.1 35.7
0/RSP0/*
host 24.0 33.5
0/4/*
host 26.7 35.0
0/6/*
host 30.0 39.1
The following example shows a router’s LED status:
RP/0/RSP0/CPU0:router# show environment leds
R/S/I Modules LED Status
0/RSP0/*
host Critical-Alarm 0
host Major-Alarm 0
host Minor-Alarm 0
host ACO 0