Filter
Top Products
FINAL DRAFT —Cisco Confidential
3-36
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
OL-17502-01
Chapter 3 Configuring General Router Features
Configuring the Management Ethernet Interface
DETAILED STEPS
Command or Action Purpose
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Enters global configuration mode.
Step 2
interface MgmtEthrack/slot/CPU0/port
Example:
RP/0/RSP0/CPU0:RO-C(config)# interface mgmtEth
0/rSP0/CPU0/0
Enters interface configuration mode and specifies the
Management Ethernet interface of the primary RSP.
See Table 3-6 for command parameters.
Step 3
ipv4 address ipv4-address subnet-mask
Example:
RP/0/RSP0/CPU0:RO-C(config-if)# ipv4 address
1.1.1.1 255.255.255.255
Assigns an IP address and subnet mask to the interface.
Step 4
no shutdown
Example:
RP/0/RSP0/CPU0:router(config-if)# no shutdown
Enables the interface to carry traffic.
Step 5
exit
Example
RP/0/RSP0/CPU0:RO-C(config)# sh config
Building configuration...
interface MgmtEth0/RSP0/CPU0/0
ipv4 address 1.1.1.1 255.255.255.255
!
end
Exits the Management Ethernet interface configuration
mode.
Step 6
router static address-family ipv4 unicast
0.0.0.0/0
default-gateway
Example:
RP/0/RSP0/CPU0:router(config-static)#
address-family ipv4 unicast
Establishes a static route.
Step 7
commit
Example:
RP/0/RSP0/CPU0:RO-C(config)# commit
Commits the target configuration to the running
configuration.