Filter
Top Products
2-9
Cisco ASR 901 Series Aggregation Services Router Hardware Installation Guide
OL-23778-01
Chapter 2 Preparing to Install the Router
Console Port Considerations
To connect an ASCII terminal to the console port, use the RJ-45 rollover cable with the female
RJ-45-to-DB-25 adapter (labeled TERMINAL). To connect a PC running terminal emulation software
to the console port, use the RJ-45 rollover cable with the female RJ-45-to-DB-9 adapter (labeled
TERMINAL). The default parameters for the port are 9600 baud, 8
data bits, no parity, and 2 stop bits.
As a console port, hardware flow control is not supported. For instructions on installing a console
terminal, see the
“Connecting the Console Port” section on page 3-11.
For cable and port pinouts, see the online document Cisco Modular Access Router Cable Specifications.
This document is provided on the documentation DVD that accompanied your router (if ordered), and is
also available online at Cisco.com.