Filter
Top Products
8
Release Notes for Cisco Aironet 802.11a/b/g Client Adapters (CB21AG and PI21AG) Install Wizard 2.5
OL-8008-01
Installing or Upgrading Client Adapter Software
Other Changes
These additional changes are available in Install Wizard 2.5 and its software components:
• Certificate-based PEAP (EAP-MSCHAP V2) authentication is now available for the CB21AG and
PI21AG client adapters.
• An Always Do User Authentication check box has been added to the Define Certificate window
for EAP-TLS authentication. Checking this check box causes the client to switch from using
machine authentication to using user authentication after the user logs on using his or her username
and password. This is the default setting. Unchecking this check box causes the client to continue
to use machine authentication after the user’s computer logs into the domain.
• EAP-FAST PAC files are tied to the machine, so they cannot be used if copied to another machine.
• You can now add columns to or remove columns from the Available Infrastructure and Ad Hoc
Networks window in ADU. To do so, choose Scan List Settings from the Options drop-down menu.
Then use the right and left arrows to move fields between the Available Columns and Selected
Columns boxes and click OK to save your changes. All of the fields listed in the Selected Columns
box now appear in the Available Infrastructure and Ad Hoc Networks window.
• The ADU About window now displays the current version of ADU and the following software
components: ACAU, the authentication supplicant, the protocol driver, and the Windows NDIS
miniport driver.
• The CB21AG and PI21AG client adapters now support a 5-GHz Japan regulatory domain
(designated -P). See Appendix D of the Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters
(CB21AG and PI21AG) Installation and Configuration Guide (OL-4211-04) for more information.
Installing or Upgrading Client Adapter Software
This section describes how to initially install or upgrade to CB21AG and PI21AG Install Wizard 2.5 on
a computer running Windows 2000 or XP. If the client adapter software is not installed on your computer,
follow the instructions in the “Installing the Client Adapter Software” section below. If you are
upgrading your client adapter software to release 2.5, follow the instructions in the “Upgrading the
Client Adapter Software” section on page 19.
Installing the Client Adapter Software
Follow these steps to install CB21AG and PI21AG Install Wizard 2.5 on your computer.
Caution Do not eject your client adapter at any time during the installation process, including during the reboot.
Note Only one wireless client adapter can be installed and used at a time. The software does not support the
use of multiple cards.
Step 1 Make sure the client adapter is inserted into your computer.
Step 2 Use your computer’s web browser to access the following URL:
http://www.cisco.com/public/sw-center/sw-wireless.shtml