Chapter 2 Preparing for Installation
Tools and Equipment
2-2
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03
Tools and Equipment
Cisco 12006 and Cisco 12406 Routers can be installed with a minimum number
of tools. The following tools are required:
• 1/4-inch and 3/16-inch flat-blade screwdrivers
• 9/16-inch wrench
• 10-mm wrench (either open-end or socket)
• 2-mm allen wrench
• ESD-preventive wrist strap
• Antistatic mat
• Tape measure
• Wire cutters
• Pliers
Safety and Compliance
The following guidelines help to ensure your safety and protect the equipment.
This section does not include every potentially hazardous situation, so be alert.
• General Safety Guidelines, page 2-3
• Compliance and Safety Information, page 2-5
• Laser Safety, page 2-5
• Lifting Guidelines, page 2-5