Filter
Top Products
9
Product Overview
Linksys DPC3008/EPC3008
Management
• Software upgradeable by network download
• Remote manageability using SNMP V1/V2 and V3
Front panel
The front panel of your modem provides LED status indicators that indicate
how well and at what state your modem is operating. See “Understanding the
Front Panel Indicators” on page 14 for more information.
1.
POWER—ON, power is applied to the modem.
2.
DS—ON, the modem is receiving data from the cable network.
3.
US—ON, the modem is sending data to the cable network.
4.
ONLINE—ON, the modem is registered on the network and fully
operational.
5.
LINK—ON, the Ethernet connection is operational. BLINKING indicates
that data is being transferred over the Ethernet connection. OFF indicates
that the Ethernet connection is not connected or has been disabled by
the user.
NOTE
After the modem is successfully registered on the network, the
POWER, DS, US, and ONLINE LEDs stay on continuously to indicate
that the modem is active and fully operational.
Back panel
DPC3008
EPC3008
1.
ON/OFF SWITCH (Provided only on products that carry the CE mark)—
Allows you to turn off of the modem without removing the power cord.
Turning the modem off using this switch makes sure that the modem is
consuming no energy.
2.
POWER—Connects the modem to the provided AC power adapter. Use
only the power supply provided with your modem.
3.
ETHERNET—One RJ-45 Ethernet port connects to the Ethernet port on
your computer or network.
4.
RESET—Press and hold this switch for 2 seconds to restore settings to
factory defaults and reboot the modem.
CAUTION
The RESET button is for maintenance purposes only. Do not use
unless instructed to do so by your service provider. Doing so may
cause you to lose any settings you have selected.
5.
MAC ADDRESS LABEL—Displays the MAC address of the modem.
6.
CABLE—F-connector connects to an active cable signal from your
service provider.