Filter
Top Products
4Jackscrew Installation Instructions (for EIP Ports)
■ Transmit—Lights when frames are being transmitted. When frames are
transmitted, the Receive LED also lights up because valid traffic is being sent on
the network.
■ Receive—Lights when frames are being received. It indicates that valid traffic is
being received from the network.
Figure 3 Ethernet Interface Processor (EIP)
Prerequisites
Before replacing the EIP connector locks, ensure that you have the necessary parts and
tools you will need to perform the installation without interruption.
Required Tools
You need the following tools to perform this replacement procedure.
■ 1/8-inch flat-blade screwdriver to remove the small screws that secure the
slide-lock bracket to the EIP port
■ 3/16-inch nut driver to tighten the jackscrews
■ ESD-prevention equipment or the disposable grounding wrist strap included with
the replacement kit
H1325a
ENABLED
U101
ENABLED
0
1
2
3
4
5
RECEIVE
TRANSMIT
COLLISION