Filter
Top Products
Send document comments to nexus3k-docfeedback@cisco.com
2-9
Cisco Nexus 3000 Series Hardware Installation Guide
OL-25338-04
Chapter 2 Installing the Cisco Nexus 3000 Series Switches
Installing the Switch
Figure 2-4 Sliding the Chassis Into the Rack
c. Holding the chassis level, insert two screws (12-24 or 10-32, depending on the rack type) in each
of the two front rack-mount brackets (using a total of four screws for the two brackets) and into
the cage nuts or threaded holes in the vertical rack-mounting rails (see
Figure 2-5).
1 Align the two rear rack-mount guides with the
slider rails installed in the rack.
3 Front-mount brackets.
2 Slide the rack-mount guides onto the slider
rails until the front rack-mount brackets come
in contact with the front rack-mount rails.
4 Mounting rails on rack or cabinet posts.