Filter
Top Products
2-3
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS
OL-1744-02
Chapter 2 Installing the Hardware
Unpacking the Client Adapter
Warning
In order to comply with RF exposure limits established in the ANSI C95.1 standards, it is
recommended when using a laptop with a PC card client adapter that the adapter’s integrated
antenna is positioned more than 2 inches (5 cm) from your body or nearby persons during extended
periods of transmitting or operating time. If the antenna is positioned less than 2 inches (5 cm) from
the user, it is recommended that the user limit exposure time.
Translated versions of these safety warnings are provided in Appendix D.
Other Devices in the Wireless Network
Refer to the user’s guide and technical reference manual for the access point, universal client, or bridge
for additional information.
Unpacking the Client Adapter
Follow these steps to unpack the client adapter:
Step 1 Open the shipping container, and carefully remove the contents.
Step 2 Return all packing materials to the shipping container, and save it.
Step 3 Ensure that all items listed in the “Package Contents” section are included in the shipment. Check each
item for damage.
Note If any item is damaged or missing, notify your authorized Cisco sales representative. Any remote
antenna and its associated wiring are shipped separately.
Package Contents
Each client adapter is shipped with the following items:
• Cisco Aironet PC Card Client Adapter, Cisco Aironet LM Card Client Adapter, or Cisco Aironet
PCI Client Adapter
• 2-dBi dipole antenna (for PCI client adapter)
• Quick Start Guide: Cisco Aironet Wireless LAN Client Adapters
• Cisco Aironet Series Wireless LAN Client Adapters Drivers and Utilities CD
• Cisco product registration card
Note The MS-DOS drivers and utilities are not shipped with the adapter. Follow this path to download
them from Cisco.com: Service & Support > Technical Assistance Center > Software Center >
Wireless Software.