Filter
Top Products
A-3
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS
OL-1744-02
Appendix A Technical Specifications
Technical Specifications
Power output
340 PC card
340 LM card
340 PCI client adapter
30 mW (15 dBm)
1 mW (0 dBm)
30 mW (15 dBm) (0.5 mW/MHz)
5 mW (7 dBm) (0.5 mW/MHz)
30 mW (15 dBm)
15 mW (11 dBm)
5 mW (7 dBm)
1 mW (0 dBm)
Note 30 mW is the maximum power level
supported by 340 series adapters.
Note See page B-3 for limitations on radiated
power (EIRP) levels in the European
community and other countries.
350 PC and LM card
350 PCI client adapter
100 mW (20 dBm)
50 mW (17 dBm)
30 mW (15 dBm)
20 mW (13 dBm)
5 mW (7 dBm)
1 mW (0 dBm)
100 mW (20 dBM)
50 mW (17 dBM)
30 mW (15 dBM)
20 mW (13 dBm)
1 mW (0 dBm)
Operating frequency 2.4 to 2.497 GHz (depending on the regulatory
domain in which the client adapter is used)
Usable channels 2412 to 2484 MHz in 5-MHz increments
Interference rejection –35 dBc adjacent channel rejection
Data rates 1, 2, 5.5, and 11 Mbps
Modulation Binary Phase Shift Keying (BPSK)–1 Mbps
Quaternary Phase Shift Keying (QPSK)–2 Mbps
Complementary Code Keying (CCK)–5.5 and 11
Mbps
Receiver sensitivity
340 series adapters –90 dBm at 1 Mbps
–88 dBm at 2 Mbps
–87 dBm at 5.5 Mbps
–83 dBm at 11 Mbps
Receiver sensitivity
350 series adapters –94 dBm at 1 Mbps
–91 dBm at 2 Mbps
–89 dBm at 5.5 Mbps
–85 dBm at 11 Mbps
Table A-1 Technical Specifications for the Cisco Aironet Wireless LAN Client Adapters (continued)