Filter
Top Products
10-14
Cisco WAN Manager User’s Guide
Release 15, Part Number OL-4552-01 Rev. C0, January 27, 2005
Chapter 10 Cisco WAN Manager Operations
Downloading Software and Firmware
• “Managing with the Image Download” section on page 10-20
• “Deleting Images” section on page 10-24
Preparing the Cisco BPX and Cisco IGX Switch to Download Software or
Firmware
To prepare the Cisco BPX and Cisco IGX switch to download software or firmware, complete the
following procedure:
Note This procedure is applicable only to Cisco IGX and Cisco BPX switches and is required regardless of
how the software image transfer is initiated.
Step 1 Access the switch CLI by attaching a dumb terminal to the switch or telnet to the switch.
Right-click a Cisco IGX or Cisco BPX node from the CWM application window and choose
Administration > Telnet to telnet to the switch. A terminal window is displayed.
Step 2 When you establish a CLI session, you must:
a. Enter the username at the prompt.
b. Enter the password at the prompt.
Step 3 Enter the cnffunc command to enable the switch for downloading.
Step 4 For a Cisco BPX node, enter index value 6 for the Download From Remote Cisco StrataView Plus
function.
For a Cisco IGX node, enter index value
8 for the Download From Remote CWM function.
Step 5 For a Cisco BPX node, enter e to enable the Download From Remote Cisco StrataView Plus function.
For a Cisco IGX node, enter e to enable the
Download From Remote CWM function.
Once the cnffunc command is executed, the switch allows downloading from a CWM workstation,
provided the latter is connected to another switch in the same network.
The following example is used for the Cisco BPX node:
node TN Cisco BPX 8620 9.4.00 Feb. 14 2003 16:36 GMT
Index Status Function
1 Enabled Automatic TRK Loopback Test on Local/Remote Alarms
2 Enabled User Command Logging
3 Enabled Automatic Card Reset on Hardware Error
4 Enabled Card Error Record Wraparound
5 Disabled Card Test After Failure
6 Enabled Download From Remote Cisco StrataView Plus
7 Disabled Logging of conn events in local event log
8 Disabled Logging of conn events in Cisco StrataView Plus event log
9 Disabled Force Download From a Specific IP address
This Command: cnffunc 6 e
Next Command: