Filter
Top Products
Preface
Organization
Cisco SCE 1000 2xGBE Installation and Configuration Guide
viii OL-7821-04
Organization
The major sections of this guide are as follows:
Chapter Title Description
Chapter 1 Introduction This chapter provides a brief introduction to Cisco Service
Control.
Chapter 2 Overview ("Introduction
to the SCE Platform" on
page 2-1)
This chapter provides a hardware overview of the SCE
1000 platform.
Chapter 3 Topology (on page 3-1) This chapter describes the possible deployment topologies
of the SCE 1000 and explains how various aspects of the
topology determine the configuration of the system.
Chapter 4 Installation and
Maintenance (on page 4-
1)
This chapter explains how to install a SCE 1000 platform
in a rack or in a general tabletop installation and how to
install or replace the power supply units and fan modules.
Chapter 5 Connecting the
Management Interfaces
and Performing Initial
System Configuration (on
page 5-1)
This chapter explains how to connect the SCE 1000
platform to a local console and perform the initial system
configuration via the setup wizard that runs automatically.
Chapter 6 Cabling the Line Ports
and Completing the
Installation (on page 6-1)
This chapter provides instructions for cabling the Gigabit
Ethernet ports for one SCE 1000 topologies and for
configuring Gigabit Ethernet (GBE) interface parameters.
Chapter 7 Basic SCE 1000 Platform
Operations (on page 7-1)
This chapter describes how to start up the SCE 1000
platform, reboot, and shutdown. It also describes how to
manage configurations.
Chapter 8 Troubleshooting (on page
8-1)
This chapter provides basic system startup troubleshooting
information.
Appendix A The External Optical
Bypass Module (on page
A-1)
This appendix explains how to install the optional external
optical bypass module.