Filter
Top Products
Contents
Cisco SCE 1000 2xGBE Installation and Configuration Guide
OL-7821-04 iii
Attaching a Chassis Ground Connection 4-10
Power Supply Overview 4-11
LEDs 4-12
Power Supply Specifications 4-14
Removing and Replacing a Power Supply Unit 4-14
Powering Down the Power Supply Unit and Disconnecting Input Power 4-15
Removing the Power Supply Unit 4-16
Replacing the Power Supply Unit 4-17
Reconnecting the Power 4-17
Fan Module Overview 4-20
Removing and Replacing the Fan Module 4-20
Replacing the Battery 4-22
Connecting the Management Interfaces and Performing Initial System
Configuration 5-1
Connecting the Local Console 5-1
Setting Up the Local Console 5-2
Initial System Configuration 5-3
Setup Command Parameters 5-3
Step 1: Configuring Initial Settings 5-6
Step 2: Configuring the Hostname 5-7
Step 3: Setting the Passwords 5-7
Step 4: Configuring Time Settings 5-8
Step 5: Configuring the DNS Settings 5-10
Step 6: Configuring the RDR Formatter Destination 5-11
Step 7: Configuring Access Control Lists (ACLs) 5-12
Step 8: Configuring SNMP 5-15
Step 9: Configuring the Topology-Dependent Parameters 5-18
Step 10: Completing and Saving the Configuration 5-20
Connecting the Management Interface 5-23
Cabling the Management Port 5-23
Verifying Management Interface Connectivity 5-24
Cabling the Line Ports and Completing the Installation 6-1
Connecting the line ports to the network 6-1