Filter
Top Products
11-9
Cisco ONS 15600 Procedure Guide, R5.0
February 2008
Chapter 11 Change Card Settings
NTP-E66 Modify Line and Status Thresholds for Optical Ports
Step 7 Click the Thresholds subtab. The default selection is Near End, 15 Min, and Line (Figure 11-1).
Figure 11-1 Provisioning Thresholds for the OC-48 Card
Step 8
As needed, complete the following:
a. Click Line, Section, Path, or Physical to provision the line, section, path, and physical options in
Table 11-3 for each OC-N port.
b. Change the selection to Near End/Far End, 15 Min/1Day as necessary.
c. Click Refresh to view or modify the thresholds for each selection.