Filter
Top Products
CHAPTER
1-1
PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration
OL-3474-07
1
Overview
This chapter describes the PA-2FE port adapter and contains the following sections:
• Port Adapter Overview, page 1-1
• Fast Ethernet Overview, page 1-2
• IEEE 802.3u 100BASE-T Specifications, page 1-2
• LEDs, page 1-4
• Receptacles, Cables, and Pinouts, page 1-4
• Network Management, page 1-6
• Port Adapter Slot Locations on the Supported Platforms, page 1-7
• Identifying Interface Addresses, page 1-16
Port Adapter Overview
The PA-2FE provides two 10/100-Mbps, 10/100BASE-T Fast Ethernet/Inter-Switch Link (ISL)
interfaces and supports both full-duplex and half-duplex operation. Refer to the “Fast Ethernet
Overview” section on page 1-2 for additional information.
Both models of the PA-2FE (PA-2FE-TX and PA-2FE-FX) are shown in Figure 1-1 and Figure 1-2.
Figure 1-1 PA-2FE-TX—Faceplate View
Figure 1-2 PA-2FE-FX—Faceplate View
46453
ENABLED
LINK0
TX0
RX0
RX1
LINK1
TX1
PA-2FE-TX
0
1
46454
ENABLED
0
LINK0
TX0
RX0
RX1
LINK1
TX1
TXRX
1
TX
PA-2FE-FX
RX
CLASS 1 LED PRODUCT
PRODUKT MIT KLASSE 1 LED
PRODUIT AVEC VOYANT DEL
DE CLASSE 1
PRODUCTO LED DE CLASE 1