Cisco Systems PA-2FE-FX Switch User Manual


 
1-7
PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration
OL-3474-07
Chapter 1 Overview
Port Adapter Slot Locations on the Supported Platforms
Port Adapter Slot Locations on the Supported Platforms
This section discusses port adapter slot locations on the supported platforms. The illustrations that
follow summarize slot location conventions on each platform:
Cisco 7100 Series Routers Slot Numbering, page 1-7
Cisco 7200 Series Routers and Cisco 7200 VXR Routers Slot Numbering, page 1-8
Cisco uBR7200 Series Router Slot Numbering, page 1-9
Cisco 7201 Router Slot Numbering, page 1-10
Cisco 7301 Router Slot Numbering, page 1-10
Cisco 7304 PCI Port Adapter Carrier Card Slot Numbering, page 1-11
Cisco 7401ASR Router Slot Numbering, page 1-12
Cisco 7500 Series Routers with VIP Slot Numbering, page 1-12
Note The port adapters shown in the slot identification illustrations may not be the same port adapter that is
documented in this guide.
Cisco 7100 Series Routers Slot Numbering
The PA-2FE can be installed in port adapter slot 3 in Cisco 7120 series routers, and in port adapter slot 4
in Cisco 7140 series routers. Figure 1-10 shows the slot numbering on a Cisco 7120 series router.
Figure 1-11 shows the slot numbering on a Cisco 7140 series router.
Figure 1-10 Port Adapter Slots in the Cisco 7120 Series Router
SLOT 0 SLOT 1
0
2
FE 0 / 0 FE
AUX
7120 - AE3
RXTX
E3
RX
EN
CEL CARALM
5
I
CONS
ACT
0 / 1
ACT
LNK
0
LNK
1
PWR
SYS
RDY
Slot 1
Slot 0
Slot 3
Slot 4Slot 5
18498
Slot 2