Filter
Top Products
viii
PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration
OL-3474-07
Preface
Objectives
Objectives
This document describes how to install and configure the PA-2FE-TX and PA-2FE-FX two-port Fast
Ethernet port adapters, hereafter referred to as the PA-2FE, which are used in the following platforms:
• Cisco 7100 series routers, consisting of the Cisco 7120 series and Cisco 7140 series
• Cisco 7200 series routers and Cisco 7200 VXR routers, consisting of the two-slot Cisco 7202,
four-slot Cisco 7204 and Cisco 7204VXR, and the six-slot Cisco 7206 and Cisco 7206VXR
• Cisco uBR7200 series universal broadband routers
• Cisco 7201 router
• Cisco 7301 router
• Cisco 7304 PCI port adapter carrier card in Cisco 7304 router
• Cisco 7401ASR router
• Versatile Interface Processor (VIP) in Cisco 7500 series routers (VIP2, VIP4, VIP6-80)
Organization
This document contains the following chapters:
Related Documentation
Your router and the Cisco IOS software running on it contain extensive features and functionality, which
are documented in the following resources:
• Cisco IOS software:
For configuration information and support, refer to the modular configuration and modular
command reference publications in the Cisco IOS software configuration documentation set that
corresponds to the software release installed on your Cisco hardware.
Note You can access Cisco IOS software configuration and hardware installation and maintenance
documentation on the World Wide Web at http://www.cisco.com,
http://www-china.cisco.com, or http://www-europe.cisco.com.
Section Title Description
Chapter 1 Overview Describes the PA-2FE and its LED displays, cables, and
receptacles.
Chapter 2 Preparing for Installation Describes safety considerations, tools required, and
procedures you should perform before the actual
installation.
Chapter 3 Removing and Installing
Port Adapters
Describes the procedures for installing and removing
PA-2FE port adapters in the supported platforms.
Chapter 4 Configuring the PA-2FE Provides instructions for configuring the PA-2FE on the
supported platforms.