Filter
Top Products
B-14
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
OL-8787-05
Options:
Sample Output:
loginMode
Change the login authentication mode.
Syntax:
Options:
Sample Output:
NOTES: This sets the authentication for the CLI. By disabling logins altogether the user is logged
in the admin account by default. There is no way to modify this default.
setldapSvrIpAddr
Modify the LDAP Server IP Address.
Syntax:
Options:
Sample Output:
NOTES: This sets the LDAP server ip address. The LDAP server will be contacted for remote
authentication.
None.
-> userListShow
username role
operator1 operator
USERID admin
Bob admin
loginMode [mode]
[mode]
0-3, 0 = Username/password required, 1=username required, 2=no authentication,
3=LDAP authentication.
-> loginMode 1
Mode successfully changed to: 1 = Password is not required
setldapSvrIpAddr [ipaddress]
[ipaddress]
The IP address of the ldap server you wish to set to authenticate in the format
"192.168.0.1"
-> setldapSvrIpAddr 123.45.6.789