Filter
Top Products
2-15
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
OL-8787-05
Figure 2-25 Log System Configurator: Preset Tab
To change the log level settings:
Step 1 Click the On-Off checkbox to the right of the setting(s).
Step 2 Click the Submit button to save any changes.
Syslog Tab
Figure 2-26 Log System Configurator: Syslog Host Tab
The Syslog tab allows the user to configure logging messages to be sent to a syslog host. If the Host IP
address is 0.0.0.0, no syslog host is configured, otherwise log messages are sent to the syslog server at
a specified IP address and port.
To setup the syslog host:
Step 1 In the Host IP dialog box, enter the IP address of the syslog host where the log files are to be saved.
Step 2 Click the Apply button to save the IP address.
Configure Syslog on a Linux Server
Step 1 Edit the /etc/sysconfig/syslog file and ensure that the -r is included in the
SYSLOGD_OPTIONS. This allows logging from a remote system. For example:
SYSLOGD_OPTIONS="-r -m 0"
Step 2 Type /etc/init.d/syslog restart, and press Enter.