Filter
Top Products
11
Release Notes for Cisco SN 5428 Storage Router Release 3.5.3
OL-6542-01
Related Documentation
Changes
The following command has been added to the CLI:
• To enable the sending of LUN Change Async events for the specified SCSI routing instance and
target combination, use the scsirouter target lunasyncevent enable command. To disable this
function at the target level, use the no form of this command.
scsirouter name target name lunasyncevent enable
By default, the sending of LUN async events is disabled for all SCSI routing instances and targets.
You can enable this function for SCSI routing instances at the target level only. See caveat
CSCee00457 for complete details.
Related Documentation
The following sections describe the related documentation available for Cisco SN 5428 Storage Router
release 3.5.3. These documents consist of hardware installation and software configuration guides, and
platform-specific release notes and readme files for the Cisco iSCSI drivers.
Release-Specific Documents
This release notes document is the only document specific to SN 5428 release 3.5.3. It is only available
as an electronic document on Cisco.com and the Documentation CD-ROM.
Hardware Documents
Refer to the Cisco SN 5428 Storage Router Hardware Installation Guide for hardware installation
procedures. This document is available as an electronic document on Cisco.com and the Documentation
CD-ROM.
Software Documents
Refer to the Cisco SN 5428 Storage Router Software Configuration Guide Release 3.4, for configuration
information and procedures. This document is available as an electronic document on Cisco.com and the
Documentation CD-ROM.
Refer to the Cisco SN 5400 Series Storage Router Command Reference, Release 3.5, for information
about the CLI command interface. This document is available as an electronic document on Cisco.com
and the Documentation CD-ROM.
For documentation on the SN 5428 web-based GUI, refer to the SN 5428 Storage Router web-based GUI
online Help system.