Filter
Top Products
7
Release Notes for Cisco SN 5428 Storage Router Release 3.5.3
OL-6542-01
Installation Notes
Determining the Storage Router Software Version
To determine the version of SN 5428 software running on the storage router, establish a Telnet or console
port session with the storage router, and enter the CLI show version command. (See Example 1.) The
Application field displays the version of software currently running on the storage router. The System
Bootstrap field displays the software version that will run the next time the storage router is restarted.
You can also check the version of the storage router software by using the web-based GUI. Log in as
monitor to display the Processor and Software Information table, or click Processor and SW (under
System) in the Monitor dynamic menu list in the left frame. The Software Version field contains the
current software version information.
Example 1 Determining the Software Version
[SN5428A01]$ show version
Cisco SN 5428-K9 Storage Router
CLI Version: 2.1
iSCSI Version: 0/2 (Min/Max)
System Bootstrap: 3.5.3-K9
Operating System: 3.5.3-K9
Switch Version: V1.5.1.12-0
Application: 3.5.3-K9
Web Server: R6_1_0
OpenSSH: 3.4p1
OpenSSL: 0.9.6e
Zlib: 1.1.4
Copyright (c) 1986-2003 by Cisco Systems, Inc
Upgrading to a New Software Release
For information about upgrading to new storage router software using the CLI, see the section “Installing
Updated Software” in Chapter 11, “Maintaining and Managing the SN 5428 Storage Router,” of the
Cisco SN 5428 Storage Router Software Configuration Guide, Release 3.4.
To upgrade to new storage router software using the web-based GUI, follow these instructions.
Step 1 In the web-based GUI, log in as “admin”. To access the GUI, enter the URL for the storage router. (Point
your browser to the storage router management interface IP address using the HTTP protocol.) For
example, type http://10.1.10.244.
Step 2 Click Maintenance to view information about the software versions currently available to the storage
router. If multiple versions of software are available, delete all versions except the currently running
version.
Step 3 (Optional) Based on your storage router configuration, click the appropriate link in the Upgrade section
of the Maintenance dynamic menu list in the left frame to download a list of currently available
software versions. Use this list to determine the software version you want to download.
Step 4 Click the appropriate link in the Upgrade section of the Maintenance dynamic menu list to download
the desired version of software.
Step 5 After you have downloaded the new version of software, click Reset in the System section of the
Maintenance dynamic menu list.