Filter
Top Products
GVRP Commands
gvrp registration-forbid
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 186
13
User Guidelines
This command forbids dynamic VLAN creation from the interface. The creation or
modification of dynamic VLAN registration entries as a result of the GVRP
exchanges on an interface are restricted only to those VLANs for which static
VLAN registration exists.
Example
The following example disables dynamic VLAN creation on Ethernet port 1.
Console(config)# interface ethernet 1
Console(config-if)# gvrp vlan-creation-forbid
gvrp registration-forbid
The gvrp registration-forbid Interface Configuration (Ethernet, port-channel) mode
command de-registers all dynamic VLANs on a port and prevents VLAN creation
or registration on the port. Use the no form of this command to allow dynamic
registration of VLANs on a port.
Syntax
gvrp registration-forbid
no gvrp registration-forbid
Default Configuration
Dynamic registration of VLANs on the port is allowed.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.