Filter
Top Products
Address Table Commands
show bridge address-table
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 88
5
User Guidelines
There are no user guidelines for this command.
Example
In this example the port security max interface configuration command configures
the maximum addresses that can be learned on the port while the port is in port
security max-addresses mode.
Console(config)# interface ethernet e7
Console(config-if)# port security max max addr
show bridge address-table
The show bridge address-table Privileged EXEC mode command displays all
entries in the bridge-forwarding database.
Syntax
show bridge address-table [vlan
vlan
] [ethernet
interface
| port-channel
port-
channel-number
| address
mac-address
]
Parameters
•
vlan —
Specifies a valid VLAN, such as VLAN 1.
•
interface —
A valid Ethernet port.
•
port-channel-number —
A valid port-channel number.
•
mac-address —
A valid MAC address.
Default Configuration
This command has no default configuration.