Filter
Top Products
IP Source Guard Commands
show ip source-guard status
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 232
16
Parameters
•
mac-address—
Specifies a MAC address.
•
ip-address—
Specifies an IP address.
•
vlan-id—
Specifies a VLAN number.
•
interface—
Specifies an Ethernet port.
•
port-channel-number—
Specifies a Port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example.
Console# show ip source-guard status
IP source guard is globally disabled.
Console# show ip source-guard status
Interface Filter Status IP Address Mac Address VLAN Type
--------- ------ ------ --------- -------------- ---- ------
e21 IP Active 10.1.8.1 0060.704C.73FF 3 DHCP
e22 IP Active 10.1.8.2 0060.704C.7BC1 3 DHCP
e23 IP Active 10.1.12.2 0060.704C.7BC3 4 DHCP
e24 IP Active Deny all
e32 IP Active 10.1.8.218 0060.704C.7BAC 3 Static
e33 IP Inactive 10.1.8.32 0060.704C.83FF 3 DHCP
e34 IP Inactive
e35 IP Inactive