Filter
Top Products
RMON Commands
rmon collection history
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 317
25
rmon collection history
The rmon collection history Interface Configuration (Ethernet, port-channel) mode
command enables a Remote Monitoring (RMON) MIB history statistics group on an
interface. Use the no form of this command to remove a specified RMON history
statistics group.
Syntax
rmon collection history
index
[owner
ownername
] [buckets
bucket-number
]
[interval
seconds
]
no rmon collection history
index
Parameters
•
index
— Specifies the statistics group index. (Range: 1-65535)
•
ownername
— Specifies the RMON statistics group owner name. (Range:
0-160 characters)
•
bucket-number
— Number of buckets specified for the RMON collection
history group of statistics. If unspecified, defaults to 50. (Range:1-65535)
•
seconds
— Number of seconds in each polling cycle. (Range: 1-3600)
Default Configuration
RMON statistics group owner name is an empty string.
Number of buckets specified for the RMON collection history statistics group is 50.
Number of seconds in each polling cycle is 1800.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
Cannot be configured for a range of interfaces (Range context).