Filter
Top Products
RMON Commands
rmon alarm
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide 323
25
rmon alarm
The rmon alarm Global Configuration mode command configures alarm
conditions. Use the no form of this command to remove an alarm.
Syntax
rmon alarm
index variable interval rthreshold fthreshold revent fevent
[type
type
]
[startup
direction
] [owner
name
]
no rmon alarm
index
Parameters
•
index
— Specifies the alarm index. (Range: 1-65535)
•
variable
— Specifies the object identifier of the variable to be sampled.
•
interval
— Specifies the interval in seconds during which the data is
sampled and compared with rising and falling thresholds. (Range: 0-
2147483647)
•
rthreshold
— Specifies the rising threshold. (Range: 0-2147483647)
•
fthreshold
— Specifies the falling threshold. (Range: 0-2147483647)
•
revent
— Specifies the event index used when a rising threshold is crossed.
(Range: 1-65535)
•
fevent
— Specifies the event index used when a falling threshold is
crossed. (Range: 1-65535)
Collisions The best estimate of the total number of collisions
on this Ethernet segment during this sampling
interval.
Field Description