Filter
Top Products
Preparing for Installation 2-15
Cisco uBR904 Cable Modem Installation Checklist
Note If an error message is displayed on the uBR904, you can find its explanation in the
Cisco Cable CPE Error Messages book, viewable online at
www.cisco.com/univercd/cc/td/doc/product/cable/cab_modm/ubcmerrs.pdf .
Cisco uBR904 Cable Modem Installation Checklist
To assist you with your installation and to provide a historical record of what was done and
by whom, use the Cisco uBR904 Cable Modem Installation Checklists in Table 2-3 and
Table 2-4. Make a copy of this checklist and indicate when each procedure or verification
is completed. When the checklist is completed, place it in your site log (described at the end
of this chapter) along with the other records for your new Cisco uBR904 cable modem.
Table 2-3 Cisco uBR904 Cable Modem Installation Site Checklist
Table 2-4 Cisco uBR904 Cable Modem Installation Task Checklist
Installation Site Information
Subscriber’s Name:
Address:
Service account number:
Serial number and MAC address of Cisco uBR904 cable modem:
Personal computer make and model number:
Network interface card type:
Task Verified by Date
Date Cisco uBR904 cable modem delivered to installation site
Cable modem and all accessories unpacked
Safety recommendations and guidelines reviewed
Installation Checklist copied
Site log established and background information entered
Site power voltages verified
Existing coaxial cable at the installation site inspected and replaced, if necessary
Personal computer hardware, software, and configuration meet site requirements
Site environmental specifications verified
Required passwords, IP addresses, and so on, available
Required tools available
Power cable connected to AC source